The continuous increase in the cost of cars is forcing people to let go of any details of saving expenses. The tire is actually a cost-consuming consumable in the process of using the car. Four tires are worth thousands of yuan. If they are used improperly and cause abnormal wear, it will be a huge blow to the owner's wallet! Coupled with the recent fluctuations in the international tire market, car users have also become anxious about the trend of tire prices. We cannot control the price of tires. Therefore, how to reduce tire wear and maximize the life of tires is the knowledge that owners must master. The way a car is driven has a lot to do with tire wear. Good and skilled driving technology can effectively reduce tire wear, extend tire life, and improve driving safety. China auto parts fair summarizes a few tips for reducing tire wear.

The air pressure must meet the standard

The driver should inflate the tires in accordance with the regulations of the car manufacturer. The vehicle wheel expo believes that when the tire air pressure is lower than the standard value, the tire shoulder wear increases sharply; when the tire air pressure is higher than the standard value, the tire ground contact area is reduced and the unit pressure is increased, which causes the middle tire tread to wear Increasing and increasing the rigidity of the tire at the same time increases the dynamic load on the wheel and easily causes the carcass to burst.

No cracks on the tread

Regularly inspect the tire surface for cracks, deformations and other defects. The tread groove of the tire gradually becomes shallower due to driving wear. If it is smooth, it will lose the effects of drainage and anti-skid. The performance of the car will be greatly reduced, and the seemingly small cracks are the hidden danger of puncture when driving at high speed. In addition, pay attention to remove the small stones in the groove in time.

Parking level

The china tire trade show recommends avoiding parking on rough, sharp or sharp stones. Do not park the vehicle near or in contact with petroleum products, acids and other materials that affect rubber deterioration. The driver should not turn the steering wheel after parking. Such an operation will accelerate tire wear.

Do not splash water

The tires are prone to overheating when driving for a long time in summer or high speed, and the air pressure increases. At this time, the vehicle should be stopped for heat dissipation. It is strictly forbidden to deflate or drop water to cool down to prevent abnormal aging of the tread rubber.

Avoid sudden braking

Do not start too fast. Avoid frequent use of brakes and emergency brakes to prevent tires from accelerating tread wear due to dragging of the tires and the ground. When turning, passing, passing through intersections, narrow roads, railway crossings, etc., you should master appropriate Speed and pay attention to road, pedestrian, and vehicle dynamics, prepare for braking, reduce frequent braking, avoid emergency braking, and reduce tire wear. When facing broken glass or other foreign objects that cannot be avoided, slow down and pass through. Do not brake sharply, because the pressure increases due to rapid braking, and glass fragments and foreign objects are more likely to get into the tire.

Choose good road

When driving in the road maintenance construction area, the method of slow and slow selection of the road surface should be adopted to avoid excessive collision of tires, or even stabbing or scratching. When driving on uneven roads, you must choose the road surface to reduce the tire Strike to avoid damage to the parts and tires. Second, slow down and avoid bumps and strong vibrations of the tires. Through muddy areas, choose a solid and slippery place to avoid tires from sagging, idling in place, and severe heat Serious cuts and scratches on tires and sidewalls.

Control speed

The turning of the vehicle should be based on the curve of the road and the turning radius. Generally, the speed should be appropriately decelerated to avoid the acceleration of unilateral tire wear due to inertial and centrifugal forces. When the vehicle is going downhill, the appropriate speed should be controlled according to the size, length and road conditions of the slope In this way, emergency braking can be avoided or reduced, and tire wear can be reduced. When the vehicle stops and stops at the stop, it should develop the habit of taxiing safely.

Check the spare tire regularly

In the maintenance and use of tires, don't forget one of the most important tires—spare tires. Spare tires are provided by the manufacturer, but they are often forgotten and lack maintenance. It is recommended that you regularly check the spare tire every 3 months and inflate it if necessary, so as not to find it flat when you need it.

Focus on abrasion resistance

Most people don't know, in fact, abrasion resistance is a basic indicator of tires. What is different from its size, load bearing and speed grade is that the abrasion resistance index is not marked on the tire's shoulder. It does not directly affect the installation or cause a direct threat to security like the other indicators above. However, interested owners may wish to learn about the index of tire wear resistance through the Internet or through other channels, which can serve as a reference for you to choose a durable tire.